No products in the cart.
Pouch Cell Edge Trimming Machine – Manual & Pneumatic Edge Trimmer for Aluminum Laminate
Our PP-QBJ-200 is a dedicated pouch cell edge trimming machine designed for post‑forming trimming of aluminum‑plastic laminate. This manual/pneumatic pouch cell edge trimming machine cuts up to 2 layers of foil in one stroke, delivering a burr‑free edge (<50µm). While larger lines may use a pouch cell three‑in‑one edge trimming folding ironing machine or pouch cell final sealing and edge trimming machine, this compact unit is perfect for R&D labs, pilot production, and small‑batch manufacturing. It also works as a standalone pouch cell airbag edge trimming machine for removing airbag edges before final sealing.
Quote Now
What Is a Pouch Cell Edge Trimming Machine?
A pouch cell edge trimming machine is essential for removing excess aluminum‑plastic film after the forming process. Our PP-QBJ‑200 model is a bench‑top, cylinder‑driven cutter that ensures clean, consistent edges. It is widely used in lithium‑ion pouch cell production lines, from university labs to small‑scale battery makers. Unlike a pouch cell three‑in‑one edge trimming folding ironing machine which integrates folding and ironing, our machine focuses solely on high‑precision trimming – making it more affordable and easier to maintain.
Manual/Pneumatic Pouch Cell Edge Trimming Machine for Precise Cutting
This manual/pneumatic pouch cell edge trimming machine combines manual feeding with pneumatic cutting power. The operator places the formed aluminum‑plastic film onto the worktable, then triggers a foot switch. A cylinder (Xingchen brand) drives the cutting blade through linear bearings, delivering a smooth, vertical cut. The imported blade material ensures a burr height of less than 50µm – no secondary deburring needed. Maximum cutting width is 200mm, and it can cut one or two layers of laminate film. With a weight of only 35kg and compact dimensions (350×550×500mm), it fits easily on any lab bench.
Technical Specifications & Key Features
Cutting width: ≤200mm
Cutting thickness: 1 or 2 layers of aluminum‑plastic laminate
Blade material: Imported high‑wear tool steel, burr <50µm
Drive: Pneumatic cylinder (0.4–0.6MPa) with linear bearings
Power: AC220V/50Hz (only for solenoid valve, cylinder uses compressed air)
Dimensions: 350mm (L) × 550mm (W) × 500mm (H)
Weight: ~35kg
Cycle: Foot switch actuation, fast and fatigue‑free
Safety & Easy Operation
The machine is designed with operator safety in mind. The cutting area is enclosed with guards, and the two‑hand + foot switch logic prevents accidental activation. All pneumatic components are CE‑rated. Daily maintenance is simple – the blade can be replaced in minutes, and the linear bearings are lubricated via built‑in ports. A one‑year warranty and lifetime technical support are included. The supplier offers on‑site training and 48‑hour service response.
Applications
R&D laboratories: Prototype pouch cell assembly
Pilot production lines: Small batches of 18650/21700 pouch cells
University battery labs: Educational and research use
Small‑scale battery manufacturers: Cost‑effective trimming solution
✂️ Burr‑Free Cutting – Imported blade, burr <50µm, clean edges every time.
💨 Pneumatic & Manual – Foot‑switch actuated cylinder cuts with consistent force, no hand fatigue.
🧪 Rugged & Compact – 35kg bench‑top unit, ideal for labs and pilot lines.